Loca glue is a type of clear nail polish that has been used by stampers/pros for years. It’s a great way to hold your stamped image down and give you time to pick up the piece and place it where you want it without having the clingy sheet stick to your nails or cause the design to smear.
Loca glue is great with non-clingy stamping plates, but when you use clingy plates like water marbling images or the new SHANY Collective Magnetic Palette, it’s really hard to get your design picked up in one piece. No matter how much thinner you apply, sometimes it just doesn’t want to let go!
Are you looking for ways to cure loca glue without UV lights? If yes, this article will tell you the different ways how to cure loca glue without UV lights.
- 1 Methods Of How To Cure Loca Glue Without UV Light?
- 1.1 1. Use Hair Dryer For Cure Loca Glue
- 1.2 2. Use A Fan For Cure Loca Glue
- 1.3 3. Use A Blow Dryer For Cure Loca Glue
- 1.4 4. Use A Candle For Cure Loca Glue
- 1.5 5. Use Hot Air For Cure Loca Glue
- 1.6 6. Use A Rubber Band For Cure Loca Glue
- 1.7 7. Use Hot Water For Cure Loca Glue
- 1.8 8. Use A Lightbulb For Cure Loca Glue
- 1.9 9. Use A Bowl Of Ice For Cure Loca Glue
- 1.10 10. Use Hot Towel For Cure Loca Glue
- 2 How long does UV Loca glue take to dry?
- 3 Will UV glue dry on its own without UV rays?
- 4 What is UV light made of?
- 5 What is loca glue used for?
- 6 Benefits Of Curing Loca Glue Without UV Light
- 6.1 1. Cure Loca Glue Without UV Light Save Your Money
- 6.2 2. Cure Loca Glue Without UV Light Save Your Time
- 6.3 3. Cure Loca Glue Without UV Light Save Your Health
- 6.4 4. Cure Loca Glue Without UV Light Save Your Design
- 6.5 5. Cure Loca Glue Without UV Light Save The Environment
- 6.6 6. Cure Loca Glue Without UV Light Save Your Sanity
- 7 Loca Glue Curing Time Designs & Layers
- 8 How To Cure Loca Glue Without UV Light – Conclusion
Methods Of How To Cure Loca Glue Without UV Light?
There are some simple ways to cure loca glue without using UV light. Here are a few of them.
1. Use Hair Dryer For Cure Loca Glue
All you have to do is just point the hairdryer above your loca glue till it is dried. This method works well if you are in hurry, but beware that this method makes your design smudge! So use only when necessary.
2. Use A Fan For Cure Loca Glue
Just point your fan on top of your loca glue. This method is useful if you are applying the nail art design to someone else, but it will take a long time to dry up your design. You can use this method for crystals also by just pointing the fan over the crystals.
3. Use A Blow Dryer For Cure Loca Glue
Use the same method as you use for the hairdryer and it will take less time than using a hairdryer for this task.
4. Use A Candle For Cure Loca Glue
By using a candle, you can cure the local glue without any time-consuming process and it works well with big designs, but for small crystals/polish, you will need to move with your design.
5. Use Hot Air For Cure Loca Glue
For this method, you will need an oven, microwave, or even a steamer! The great thing about this method is that it can be used very well with a big design, but for small designs, you may need to keep moving the hot source around your nail. So choose this method for bigger crystals/polish.
6. Use A Rubber Band For Cure Loca Glue
Just put a rubber band around your bottle of loca glue and leave it till the time you need to use it. This method is good if you are not in hurry and do not want to waste time but take care that you do not leave the glue in a hot place because it may make your bottle of glue unusable.
7. Use Hot Water For Cure Loca Glue
For this method, you will need to heat the water and then take a bowl, put your bottle of loca glue, and carefully submerge it in hot water till it is cured. But keep in mind that if you leave the glue for a long time in hot water, it may spoil the glue. Also, you cannot use this method with a big design, but it is very suitable for small crystals/polish.
8. Use A Lightbulb For Cure Loca Glue
Put your bottle of loca glue near a light source or lamp and keep it under the light source till it gets cured completely. This method is suitable for crystals/polishes that are bigger. If you want to use this method with a small design, make sure the light source has a different height from your nail because if the bulb is too close, it may burn out the design or even catch fire.
9. Use A Bowl Of Ice For Cure Loca Glue
Put your bottle of loca glue in a bowl and then pour a bowl of ice into the bowl that has your bottle of glue. Leave it for 5 minutes to cure completely, but be careful that you do not leave the design under the ice too long because it can spoil your design. The great advantage of using this method is that you can use it with a big design or crystals/polish.
10. Use Hot Towel For Cure Loca Glue
If you have a hot towel, just put it over your bottle and wait for a few minutes and your design will be cured. This method is time-consuming but effective. You cannot use the big designs with this method because it takes too much time to dry them completely, so choose this method for small crystals/polishes that are bigger.
How long does UV Loca glue take to dry?
The average UV Loca glue takes about 10-30 seconds to dry. Sometimes it takes 3 seconds as well. However, it is important to note that the time it takes for the glue to completely cure will vary depending on the thickness of the layer that was applied, as well as the type of UV light that was used.
For best results, it is always advisable to consult the manufacturer’s instructions before beginning any project.
Will UV glue dry on its own without UV rays?
UV glue is designed to dry quickly when exposed to ultraviolet light. However, if it is not exposed to UV light, it will eventually dry on its own over time. The amount of time it takes for the glue to dry without UV exposure will vary depending on the thickness of the layer that was applied, as well as the ambient temperature and humidity.
For best results, it is always advisable to consult the manufacturer’s instructions before beginning any project.
What is UV light made of?
UV light is a type of electromagnetic radiation. The UV spectrum is divided into four main categories: UVA, UVB, UVC, and Vacuum-UV.
UVA rays are the longest wavelength and weakest form of UV radiation. They are present in sunlight all year round and can penetrate clouds, glass, and some plastics.
UVB rays are shorter in wavelength and more harmful than UVA rays. They are the primary cause of sunburn and can also damage the eyes.
UVC rays are the shortest wavelength and most harmful form of UV radiation. They are completely absorbed by the atmosphere and do not reach the Earth’s surface.
Vacuum-UV rays have even shorter wavelengths than UVC rays. They are only present in artificial sources of UV light, such as tanning beds and black lights.
What is loca glue used for?
Loca glue is a type of adhesive that is used in a variety of different applications. It is commonly used in the electronics industry for bonding LCD screens and touch panels. It is also frequently used in the optoelectronics industry for attaching optical filters and lenses.
Additionally, loca glue can be used for general purpose bonding, such as repairing plastic parts or attaching metal emblems.
Benefits Of Curing Loca Glue Without UV Light
Here are the benefits of curing local glue without UV light.
1. Cure Loca Glue Without UV Light Save Your Money
You do not need to buy a UV lamp or any other expensive equipment, but you can cure the Loca Glue just by using a simple household item.
2. Cure Loca Glue Without UV Light Save Your Time
You will not waste your time in curing Loca Glue under UV light. It’s just a simple step that you do with household items.
3. Cure Loca Glue Without UV Light Save Your Health
UV light can be very harmful to your skin and eyes if you do not use it properly and it may cause cancer because of radiation. Also, a UV lamp is difficult to transport and the bulb in the lamp may be burned out easily.
Reference Video – How to use LOCA The Correct Way. Galaxy Note 3 Glass Repair
4. Cure Loca Glue Without UV Light Save Your Design
Since you do not use UV light for curing local nail glue means that your design will not be affected and it will remain the same as you stamped it.
5. Cure Loca Glue Without UV Light Save The Environment
Using the household item will not pollute the environment and you do not need to use any equipment.
6. Cure Loca Glue Without UV Light Save Your Sanity
You can use the household item to remove the local glue without throwing it off in some dangerous way like flushing the liquid down the drain, spilling your liquid on the floor, etc. So you will get rid of the frustration of removing it from multiple surfaces and even yourself!
Loca Glue Curing Time Designs & Layers
1. Loca Glue Curing Time
The curing time of loca glue depends on the hot/cold source you are using to cure your design. The shortest curing time so far is 15 secs and the longest one is 8-10 mins. Here are some examples:
- If you use a fan, it will take around 3-5 mins for crystals or polish designs to get cured completely.
- If you use a hairdryer to cure your design, it will take around 15-20 secs for crystals or polish designs to get cured completely.
- If you use a candle, it will take around 2-5 mins for crystals or polish designs to get cured completely.
2. Loca Glue To Cure Small Designs
If you want to cure small designs with larger crystals/polish, the best way is to use a steamer because it takes less time and can be used very effectively for small designs. Also, if your design is covered with bigger crystals/polishes, it would be impossible for a steamer to dry them individually, so try not to cover a big design with smaller crystals/polishes.
3. Loca Glue To Cure Your Design Multiple Times
This method can be used to cure your design multiple times, but you will need to wait every time for the glue to get dry. Once you have cured it once, just let it dry and then put another layer of design on top of that and then use the heat source again! You can do this two-three times with the same design before it becomes too thick.
4. Loca Glue To Cure Big Designs Quickly
If you want to cure your big designs quickly, take a nail art pen and use it to draw your design on paper then just transfer that design to your nail using a water or manicure stick! Then just apply a thick layer of glue to your design and then pour a bowl of ice over it. Leave it for a few minutes to cure completely, you can use this method with any hot/cold source too.
5. Loca Glue To Cure Thin Or Thick Layers
You can use this method to cure any thickness of loca glue you want, even if you want to make a very thick layer of glue/polish on your nails you can cure it using this method. This method is time-consuming but effective, if you are in a hurry then use the steam method or cold towel for quick results.
How To Cure Loca Glue Without UV Light – Conclusion
There are many ways to cure loca glue without UV light, but the most common way is to use a fan.
If you want to cure small designs with larger crystals/polishes then you can use a steam method or cold towel which both take less time and work very effectively for big and small designs!
You can also use a hot towel and ice method, but be careful and never leave your design under the ice for too long.
I fell in love with crafts & fixing things when I was 11 years old – after discovering the world of blogging, I am combining my passions to present the world with well-researched guides & reviews about everything related to adhesives & glue.